Battery Combiner 600

• Suitable for alternators up to 600-Amps with 500-Amp

   continuous rating, 750-Amp intermittent current (5 min),

   2500-Amp closing current, and alternator charging

   levels up to 18-Volts

• Simple basic installation requires two (2) battery cables

   and a ground cable. Comes with mounting hardware and

   cable terminals. When connecting the large Combiner 600

   terminals to the positive (+) terminals of the batteries,

   USE A CABLE GAUGE THAT IS RATED FOR AT LEAST

   75% OF THE ALTERNATOR’S OUTPUT CURRENT

   RATING. When connecting the ground terminal to the

   battery negative (-) posts, they must be connected

   together with a cable large enough to handle starter

   motor and alternator currents

• Combiner 600 switches to charge mode when the

   lead-acid battery being charged reaches 13.2-Volts

IMPORTANT NOTE

The Battery Combiner 600 is ONLY recommended if you have a dedicated house

battery that will be charged automatically with a Combiner or Trollbridge.

Features & Specifications

• Protects alternator against overload from low battery levels

• Waterproof and Ignition rated for explosive atmosphere

• Electronic thermal monitoring with shutdown & restart

• Can be used on alternators with internal regulators 

• Green LED Indicates when combined for charging, and red

   LED Indicates Overload or Low Voltage Detected Condition 

• Draws no current when batteries are not being charged

   and less than 150-Milliamps when charging is in progress,

   so no heat sinking or cooling required 

• No diodes to burn out if accidentally shorted

• Withstands ambient temperature to over 175°F (80°C)

   for exposed or engine compartment installations

• No special wiring for alternators with external sense

• Optional external remote for Off/Automatic/On.

   Remote “ON” can be used for assisted engine starting

• One (1) year factory-direct limited warranty

Download ManualWarranty